LNB OCTO Inverto IDLP-408OUT OCKTO - značkový LNB pro až 8 (okto) nezávislých satelitních přijímačů (8 výstupů) anebo pro multiswitche či přepínače...
Konvertor známé značky INVERTO pro příjem digitální satelitní TV, s unikátní možností připojení až 8 přijímačů, Standardní frekvenční rozsah 10,7 - 12,75 GHz, velmi výhodná cena. Dlouhý krk vhodný i na Multifeed.
TIP: Se speciálními switchi lze s tímto LNB vytvořit až 8 satelitních pozic pro až 8 přijímačů a switche jsou přitom dešti odolné a nevyžadují napájení 230V na střeše! (recept: 1x vhodná parabola, 8x tento Octo LNB , 8x octo switch, 144 F konektorů, kabel 64x cca 1m ke switchům + 8x od switche k receiveru)
kw: LNB, KOINVEOCTO, DiSEqC, OCTO, Inverto, 408, OUT
8 Output 40mm LNB 
IDLB-OCTL40-OOOOO-OPP
With its 8 Outputs this LNB allows for the connection of up to 8 Set-top boxes or 4 Dual-tuner PVRs without the need of an external Multi-Switch.
Specifically designed for the European DTH markets, this LNB provides optimized reception capabilities. It is ready for High Definition transmissions and provides excellent Noise Figure performance. Manufactured to the highest industry quality standards and designed to meet strict specifications, this LNB is an ideal solution for the satellite broadcast reception across Europe.
Main Features
• Low phase Noise HDTV-DVBS2 compliant
• Low Noise figure of 0.2 dB
• Low Power consumption
• Very high Cross-Pole performance
• Very high Frequency stability
Inverto OCTO - Product Specifications:
| Low Band Input Frequency Range |
10.7~11.7 GHz |
| Low Band Output Frequency Range |
950~1950 MH |
| LO Frequency |
9.75 GHz |
| High Band Input Frequency Range |
11.7~12.75 GHz |
| High Band Output Frequency Range |
1100~2150 MHz |
| LO Frequency |
10.6 GHz |
| Noise Figure |
0.2dB typ. (0.7dB max.) |
| LO Initial Accuracy |
+/- 1.0 MHz max. |
| LO Temperature Drift |
+/- 3.0 MHz max. |
| LO Phase Noise @ 10K Hz |
-90 dBc/Hz max. |
| Conversion Gain |
55 dB min. |
| Gain Ripple |
+/- 0.75 dB/27 MHz |
| Gain Variation |
+/- 4 dB |
| Image Rejection |
40 dB min. |
| 1 dB Compression Point (O/P) |
0.0 dBm min. |
| Crosstalk Isolation |
18 [min.] dB |
| Control Signals Ca [ V ] |
10.0 ~ 14.0 V |
| Control Signals Cb [ H ] |
16.0~20.0 V |
| Control Signals Cc |
22+/-4 KHz |
| Output Supurious |
- 60 [max.] dBc |
| Output VSWR |
2.5 : 1 |
| Radiated Interference |
-45 dBm |
| DC Power |
210 mA Max.@ 11-20V |
| Working Temperature |
-30~+60 °C |
| Output Impedance (connect to STB) |
75 Ω (F-Type) |
| Weight |
256 g |
LNB Inverto Okto OCKTO Downloads
Specifications - PDF datasheet s 3D modelem LNB - můžete rotovat...
SP-IDLB-OCTL40-OOOOO-OPP(V041108)

Images
LNB Inverto OKTO Related Links
Product registration
Frequently Asked Questions
What is a feedhorn?
The feedhorn is the part of a satellite dish system which gathers the reflected signal from the dish and focuses it towards the LNB.
What is an LNB?
An LNB - Low Noise Block (also called an LNC- Low Noise Converter), is used for communications (broadcast) satellite reception. The LNB is usually affixed either in or on the satellite dish.
What is a Monoblock LNB?
This design consists of two independent LNBs in a single case. The two LNBs can be automatically addressed with any DiSEqC 1.0 or higher receiver. In some cases they can also be addressed with ToneBurst / MiniDiSEqC. However, they are only available for satellites with a fixed 3 degree, 4.3 degree, 6 degree …spacing. In Europe, for example, there are monoblock single, twin and quad LNBs for the Ku band, which have a pre-defined spacing of 6 degrees (for Astra 1 / Hotbird , for example).
Why can I receive only one satellite with my Monoblock?
Monoblock LNBs are designed for a specific dish size, 80cm for example. If your dish is too small (70cm for example) or too wide (90cm for example) it is not possible to receive both satellites together. Please choose the dish size for which the monoblock LNB has been designed.