EuroShop Store
-->

Duolabs DIABLO Programátor CAS 3+ PLUS

2736 Kč s DPH
2261 Kč bez DPH
2552 Kč s DPH
2109 Kč bez DPH
Ušetříte: 7% z ceny

Duolabs programátor CAS3+ Cas Interface 3+ Plus - USB/COM programátor doporučený pro Diablo CAM karty pro přeprogramování software a i pro jiné CAM modulym, SIM karty apod. CAS3plus je tak nejuniverzálnější programátor karet na trhu

Inovovaný typ programátoru Cas3+ z dílny Duolabs - můžete programovat všechny známé čipové (SMART) karty (pro SAT, GSM apod. aplikace), opravovat CAM či využít funkci JTAG pro opravy bootovacich programu vybraných satelitních přijímačů (Dreambox a spol.), s PC je propojen přes USB a alternativně i RS232 - snadné intuitivní ovládání - CAS Studio, můžete emulovat UNI čtečku karet přes RS232 (stáhněte si a v demo módu zjistíte, co vše umí).

English User's Manual for Cas Interface 3 (PDF 2,8 MB)

Cas Interface 3 - Návod na Použitie - Slovensky

Programátor Duolabs CAS 3 Plus a CAS Studio Vám přes čtečku karet a PCMCIA slot umožní:

  • naprogramovat CA moduly jako např.: Diablo CAM, Magic CAM (Matrix Reloaded, Matrix Revolution, Matrix Reborn), SKY CAM (Joker, Zeta Red, Zeta Blue, Zeta Yellow, Super Joker, Skycrypt, Freex TV, Icecrypt, Neotion), XCAM (XCAM Premium, XCAM Platinum), Dragon CAM (T-REX), Giga CAM...
  • naprogramovat Smart cards jako např.: Opos card, Fun card, Titan card, Knotcard, Wild card, Titanium 2, Dragon card, Penta V3 card, MII, Platinum, Cerebro, K3, Didem, Daytona, Anaconda, Gamma
  • Oprava modulů Dragon, Xcam, Xcam Premium,
  • Oprava Flash v přístrojích Dreambox, programování přístrojů s dekodérem UCAS (Xtreme, Nextwave, Manhattan),
  • Podpora pro všechny operační systémy Windows: Vista, XP, Win ME, Win 2000,
  • Emulace Phoenix a Smartmouse 3,58/3,68/4,00/6,00 Mhz pro ISO 7816 standardní karty (přes RS232 kabel)
  • CAM Explorer - procházení menu libovolného CAM modulu 
  • Editace a čtení telefonních SIM karet
  • doplňková funkce Wincrypt (zakryptuje vaše soubory a složky ve Windows algoritmem 3DES klíče z vaší osobní SIM karty, klíč SIM karty je považován za nedobytný)
  • USB a RS232 konektor (RS232 jen pro funkci Phoenix a Smouse)
  • Výhodná cena, mnoho funkcí... Doporučujeme!!!

Obsah balení Duolabs Cas Interface 3 +Plus:
- CAS3 Plus Interface - programátor
- 20-pin kabel, 30cm délka
- Dummy-card

Doporučujeme pro:
Duolabs DIABLO CAM  (pro všechny modely)
Opravu dreamboxů
...programuje samozřejmě i jiné CA, CAM moduly, čte SIM karty apod...

anglický popis:

Description:

Yet again Duolabs strike back with another ground breaking device. The Cas Interface 3 (discontinued) and Cas Interface 3 +Plus (from 2006).

In a single product, the CAS Interface 3, combines all the superb features of the CAS Interface 2, its Add-On Board plus many additional options.

This new release offers very advanced technical features. Unlike the CAS Interface 2, the CAS Interface 3 can fully manage PCMCIA connectors and easily connect external additional modules.

However, the most interesting feature is the possibility of being able to emulate the PCMCIA port of a Common Interface (EN50221) receiver and thus use a Cam directly as if it were inserted in a receiver.
Consequently the CAS Interface 3 can also be used by professionals to test a CAM (Conditional Access Module) without inserting it in a receiver.

CAS Interface 3 also enables users to manage and program several types of SmartCard, which includes both current ones and those yet to be developed.

Therefore the CAS Interface 3 can be regarded as a multifunction programmer suitable for the management of J-Tag, ISP, I2C, etc., through a USB port.

All features are explained in the User Manual available to download from our site.

The CAS Interface 3 will be available through our official distributors and via our online shop.

The Kit supplied with CAS Interface 3 comprises of:

• 1 CAS Interface 3 +Plus
• 1 20-Pin female cable, length 30 cm
• 1 J-Card
• 1 Dummy Card
 

Technical Information:

The main features of this great device are as follows:

  • USB Full Speed connection at 12 Mbit
     
  • RS-232 Serial Connection
  • 20 Pin External Connector
  • Internal Clock Speed 48Mhz
  • No need for external power supply
  • Full PCMCIA connector support
  • Full support for next generation Wireless devices
  • CAS Studio user friendly GUI

On the ground features:

Supported Common Access Modules (CAM):

Diablo CAM. Cas Interface 3 together with Cas Interface 2 are the only programmers which are supporting the Diablo CAM Light, Diablo CAM Wireless and Diablo CAM WiFi programming. The programming for this device is very quick and reliable. Simply insert the CAM in the Cas Interface and choose the file you want to load in.

Magic Cam, Matrix Cam, Matrix Revolution, Matrix Reloaded, Matrix Reborn, and all CAMs based on SIDSA chipsets, which can be managed directly by means of a PCMCIA connector. For a full list of supported modules, open the Graphics Menu of Cas Studio. Remember to download the latest release from our web site.
Thanks to the High Speed internal clock Cas Interface 3 is around 4 times faster than Cas Interface 2. Most of software routines for Flash writing have been rewritten.

Joker Cam, Zeta Cam and substantially all CAM modules based on NEOTION chipsets. These modules can be programmed and repaired using a J-Card. For a full list of supported modules, open the Graphics Menu of Cas Studio. Remember to download the latest release from www.duolabs.com.

Dragon Cam. It is possible to program any version by inserting the Dragon Cam into Cas Interface 3 and using a Dummy Card. This mode eliminates the need of inserting the Dragon Cam into a receiver, which can sometimes damage the CAMs besides being unpractical. It is also possible to repair faulty Dragon Cams if they fail to initialize due to a faulty Flash Memory. To do so, it is sufficient to open the module and connect a few wires, following a procedure that can be easily implemented even by less expert users.
Special thanks goes to Dream Multimedia for their support and patience.

X-Cam, with ANGEL and ORION chipsets, standard and premium version. It is possible to program any version by inserting the X-Cam into Cas Interface 3 and using a Dummy Card. This mode eliminates the need of inserting the X-Cam into the receiver, which can sometimes damage the CAMs besides being unpractical. It is also possible to repair faulty X-Cams if they fail to initialize due to a faulty Flash Memory. In this case it is necessary to open the module and connect a few wires, following a procedure that can be easily implemented even by less expert users.
Special thanks goes to X-Crypt for their support.

GigaCAM with Smit chipsets. This is one of the most recent adds to the CAM programming.


Smartcard support.


Smartcard programming.
This feature is very important for all those who wants to program a Smartcard based on PIC microcontroller or Atmel microcontroller. The full list of Smartcard can be viewed directly from the graphical menu of Cas Studio.
More... All the OS based cards like Titanium Card, OPOS Card, Knotcard and more can be programmed without any problem throught the USB port. All future Smartcard can be supported thanks to the great flexibility of Cas Interface 3.Dragon Card Loader can be fixed if corrupted by the special repair function.

RS-232 Phoenix Smartmouse emulation.
This emulation can be done through the RS-232 serial port. No matter what's the clock speed for the Smartcard. You can either choose 3,58/3,68/4,00/6,00 Mhz. This great feature is given by the total flexibility of the internal programmable clock generator.

DreamBox 56xx and 7000 series boot repairing function.
If your DreamBox wil not reboot due to a faulty flash the CAS Interface 3 will solve your problem without the need for any special cables or hard soldering.

Sidsa embedded chip Set-Top-Boxes programming.
Program the Sidsa CA embedded module. This most works like Cam programming feature. No need for special cables or special connectors.
Support receivers are Xtreme, Manhattan, Nextwave 2500.

Cam Explorer.
This is a real cool feature which allows the user to insert any Cam in the PCMCIA connector and browse the content of you Cam. This acts like a real Common Interface Set Top Box. It gives you the possibility to get into the menus and at the same time use all the remote controller features.

Various Utilities.
Various PC utilities are included in Cas Studio. All those tools are free of charge and can be freely used. Duolabs made them to give the user the possibility to enjoy other

- Sim Editor. This software allows you to edit your GSM smartcard. Save/edit phonebook, SMS and Smartcard files.

- Wincrypt. This software allows you to encrypt and decrypt your files and folders using as 3DES key your GSM Smartcard. This software works pretty much as Winzip but the encryption is secured by a secret key in your GSM Smartcard.

Aktuální informace na stránce výrobce, stejně jako CAS Studio zdarma ke stažení (funguje jen s tímto originálnímprogramátorem),


Přidat do košíku:

  • Kód: CAS3+
  • Přepravní hmotnost: 0.7kg
  • 3 Balení skladem
  • Výrobce: DuoLabs



Sdílet / uložit stránku do záložek:
Jaggni to - klikněte a přidáte tuto stránku do svých záložek na JAGG.czJagg.cz  klikněte a přidáte tuto stránku do svých záložek na Linkuj.czLinkuj  klikněte a přidáte tuto stránku do svých záložek na Vybrali.sme.skVybrali.sme.sk  Sdílej tuto stránku za použití mnoha bookmarkovacích služeb! - česky
link to Facebook.comFacebook  link to del.icio.usdel.icio.us  link to TwitterTwitter  link to YahooYahoo | Sdílej tuto stránku za použití mnoha bookmarkovacích služeb! - english | [ Více... ] 
Copyright © 2017 EuroShop. Powered by EuroShop.


Upozornění: Veškerý obsah tohoto webu je chráněn podle autorského zákona, zákona o ochranných známkách a podle příslušných ustanovení obchodního zákoníku o nekalé soutěži. Texty, výtvarná, fotografická a jiná díla zde se nacházející jsou chráněny každé zvlášť i v celku včetně jejich uspořádání a bez prokazatelného souhlasu provozovatele je výslovně zakázáno jejich kopírování a další šíření jakýmkoliv způsobem. Některé komponenty mohou obsahovat skryté ochranné prvky, které budou využity pro občanskoprávní i trestní řízení proti neoprávněným osobám.