BlueAnt Q1 - hlasem ovládaný headset.

BlueAnt Q1 HF Multipoint A2DP Headset handsfree Bluetooth v2.1 EDR s aktualizací firmware přes USB, technologie 2 mikrofonů pro odstínění ruchu na pozadí, stejný chipset jako Jawbone ICON.

• Online Manuál
• Manuál Q1 PDF
• Rychlý start Q1 PDF
• Interaktivní demo
• Výhody proti běžným levným HF - Firmware Upgradeable - přes USB nahrajete nejnovější verzi firmware, snadné dobíjení z každého USB portu apod.
• Voice Controlled Bluetooth Headset Blue Ant - hlasem ovládaný headset

USB připojení pro dobíjení (sloužící zároveň i pro datovou komunikaci - upgrade firmware a pro nastavení předvoleb z počítače, což je u BT sluchátek ojedinělá možnost), což znamená, že Vám již stačí jedna nabíječka pro moderní mobil (anebo USB port a mikro USB kabel) i pro tento headset, "True" Multipoint Technology pro opravdové spojení (tedy i pokud vedete aktivní hovor, od druhého se neodpojí) se 2 zařízeními.

Multipoint technology means that you can connect two phones to the Q1 at the same time and answer whichever one rings. For example if you have a business phone and a personal phone you can connect them both to the Q1 at the same time.

The BlueAnt Q1 supports "true" multipoint technology: although other headset makers claim to support multipoint, most other headsets in the market today actually disconnect the second phone when you are on a call on your headset. This means that if you receive a call on your other phone while you are already on a call you will have to answer that call using the phone handset.

With the BlueAnt Q1 both phones remain connected even when you are on a call. If you get a call on your other phone you can use the Q1 to put your active call on hold and answer your other phone (just hold down the "Vol +" button for one second).

If you want to put the second call on hold and swap back to the first call on the other phone, just hold down the "Vol +" button again. You can keep swapping between calls and phones as many times as you like.

= v jednu chvíli můžete mít současně připojen mobilní telefon a Skype z notebooku, anebo 2 telefony...

Voice Control

The BlueAnt Q1 is equipped with simple and easy to remember voice commands that put you in control. You no longer need to remember complicated button combinations or even look at your phone: just say one of the voice commands and the Q1 responds. It's that simple.

Unlike other headsets that only support voice dial capabilities through the mobile phone's voice features, voice control is embedded in the Q1 headset itself. When you want to do something, just click the BlueAnt button and wait for the Q1 to ask you to "Say a Command". Then say the voice command you want, loudly and clearly, and the headset will obey.

As well as being able to make calls, you can use your voice to check and change your Q1's settings, find out if you are connected to your phone, and even enter pairing mode.

And if you get stuck, just ask the Q1 "What Can I Say?" and the Q1 will read out a list of available voice commands. There is also a "Teach Me" command that guides you through all the Q1's functions.

Noise Reduction Technology

The BlueAnt Q1 has been designed to reduce background and wind interference in noisy environments.

The Q1 software constantly monitors and removes background noise during your call, and the Q1's custom-designed internal wind shields reduce wind noise from a roar to a whisper. The patented technology prevents wind from interfering with your conversation, allowing you to talk naturally in a windy environment.

If you find yourself talking in a very noisy or windy environment, simply click the BlueAnt button during the call to switch between standard and maximum voice isolation and noise reduction settings.

• Standard voice isolation mode gives you a natural sounding voice while removing mild background noise.
• Maximum voice isolation mode reduces nearly all background noise without affecting the quality of your voice to give you high levels of voice intelligibility in very noisy environments.

Hear For Yourself How The Q1 Compares

We have carried out extensive wind noise testing to develop the best wind noise performance on the market.

To see and hear for yourself just how much wind noise the Q1 eliminates when compared against one of the leading headsets on the market, take a look at the screen shots below, and listen to the accompanying audio recordings.

These recordings were made under laboratory conditions, with winds of 13 miles per hour (6 meters per second) blowing directly towards the headsets.

BlueAnt's Simply Connect Technology

With BlueAnt's Simply Connect Technology you no longer need to spend hours reading a complicated manual to learn how to use your product. The Q1 talks you through it, every step of the way.

Turn the Q1 on for the first time and BlueAnt's embedded audio Quick Start Guide will explain how to pair it with your phone so that you can get set up quickly and easily and get on with making calls.

Voice Answer

The Q1's advanced voice control doesn't stop when the phone rings.

Answering a call is as simple as saying the word "Answer". Simply wait for the Q1 to ask you if you want to take the call and then say the word. It's that simple.

If you don't want to take the call, just say "Ignore".

You can also answer or ignore a call using the BlueAnt button. Simply click once to answer the call, or double click to ignore.

Design and Comfort

Distinctive styling, innovative control and superior acoustic performance - the Q1 represents the best-in-class for Bluetooth headsets.

The Q1's leading edge design positions the product as a market leader in both aesthetics and performance, and is intended to appeal to a style-conscious tech savvy user. Strong geometric forms and limited color application create a minimal and sophisticated design.

The high quality feel of the Q1 is enhanced by the use of quality materials and attention to surface finishes. The brushed aluminium top casing adds value, while the softer textured underside surfaces sit comfortably on the user's cheek.

With a strong focus on human factors, the pliable gel ear-bud moulds to the user's ear without undue pressure, ensuring the headset remains comfortable when worn for extended periods. The optional ear-hook adjusts to suit individual ears, and can be reversed when the headset is worn in the opposing ear.

BlueAnt Q1 Specifications

Santa Clara, CA – Dec. 1, 2009 – One of the best features of the award-winning BlueAnt Q1 Voice Controlled Bluetooth headset is that it allows for quick and easy firmware updates. Q1 owners can take advantage of this with the just-released Firmware Version 8.19 update that adds A2DP audio streaming to the Q1 so they can listen to music, podcasts, and hear turn-by-turn directions from mobile phone GPS applications.

“This upgrade provides major enhancements to the already easy-to-use and functionality-rich Q1 headset at no cost to our customers. With more mobile phones like the iPhone 3GS incorporating AD2P streaming audio, our customers were eager to use their Q1 headsets to listen to music and podcasts, and enhance the hands-free driving experience by listening to directions from GPS applications,” said Taisen Maddern, BlueAnt executive chairman. “We are happy to provide this capability through a simple, quick firmware upgrade.”